DIMENSIONS  &  CAPACITY

Material                    :  STRENX 700  &   P355 GH

Length                      :   7.500 mm – 12.000 mm

Height                      :    3.600 mm  – 3.950 mm

Width                       :    2.450 mm  – 2.550 mm

Axle Distances       :    1.310 mm

Tare Weight             :   6.000 kg ≈ 8.500 kg  ± % 5

King-Pin Height      :   1.220 mm / 1.400 mm

Volume Capacity    :    22 m³  – 60 m³

Operation Pressure        2 Bars

Test  Pressure           :    3 Bars ( 30 min. Impermeability test)

Work Temperature    :   -40 ºC + 80 ºC

CYLINDRICAL BODY TYPE: Manufactured in 25m³ to 62m³ volumes according to customer request. Body is “cylindrical type form with high strength  steel produced from EREĞLİ  or  STRENX  brand and manufactured by certified & qualified welders complying with the directive 97/23 / EC.Along with the lightness of the load, the amount of payload transport reaches its maximum value. Operating  pressure 2 Bars and  test pressure 3 bars.  After welding  all body , NDT  applications are tested .

CHASSIS: The monoblock is in the frame structure and there are 3 axle system on frame. In accordance with the EEC directives, high strength chassis steel and traverses are used. During the frame assembly, the optical laser measuring device is used to produce a smooth and perfect chassis. The road grip and concept of the chassis is perfect. Chassis have EC Veichle Type– Approval Certificate with regard to Directive 2007/46/EC

SUSPENSION & AXLE: All are AKTAŞ brand suspension bellows and parabolic single / double layer Z-leaf spring suspension system is used. The front axle is the lift control from the tractor cab. 3 x 9 ton carriage capacity is used with drum or disc axle system. SERTEL brand is preferred as indigenous axle brand and BPW or SAF is used in imported axle brands.

BRAKE  SYSTEM:  WABCO  2S-2M EBS + RSS is installed in accordance with ECE R13 BM / AEK Regulation. There are currently 2 units ARFESAN brand brake chambers and 4 units spring brake chambers The engine has a balanced braking system which gives the standard brake load and the tire wear is minimum. The road holding and brake speed values of the lambs are the standart  level.

ELECTRIC SYSTEM : SA-BA brand electric system is used  which is suitable to ECE R48 directive and  2×7 & 15 Pim suitable to ISO 12098 .

KING – PIN :  2 “King-Pin bolted  according to DIN 74080 and ECE R55.

HYDRAULIC SYSTEM: The damper motion is realized with HİDROMAS brand 5-stage heavy type telescopic cylinder which provides 45º tilt angle. Hydraulic oil tank is original HİDROMAS brand with suction filter, damper pneumatic control, double speed lowering valve and level control safety. The connection between tractor and roller is provided by 2 sockets (jacks).( Coupled to customer PTO).